Table of Contents
Advertisement
Settings Used on this Instrument
System Parameters
Value
Indication (Parameter)
Master Tuning
415.3–466.2 (Hz)
Switches the operating mode for transpose.
System
Transpose Mode
Scene
These parameters configure the functions for the [TRANSPOSE] knob.
System Transpose
Speaker Volume
Transpose Knob Mode
Output Volume
Speaker & Output
System Tranpose
-5 (G)–0 (C)–+6 (F#)
Display Contrast
1–5
Always On, 3sec, 10sec,
Display Off Time
30sec, 1–3min
Auto Off
Always On, 5min, 30min
Speaker Volume
0–11
Output Volume
0–11
These parameters are the speaker settings.
Off
Speaker Setting
On
Auto
Output Mode
Stereo, Mono
Sets the "hold mode, " which sustains notes even after you stop blowing.
Off
Hold Mode
Breath
Key
Specifies how the sound responds to the force of your breath (breath sensitivity).
L5–L1
Breath Curve
M
H1–H5
Explanation
Changes the system tuning.
* The displayed value is the frequency of the A key.
Turn the [TRANSPOSE] knob to transpose the sound in that amount.
The transposition does not change even when you select a scene.
The transposition will be as specified by the scene.
* The value indicated by the [TRANSPOSE] knob might be different than the actual
transposition.
* Even if transposition is specified for the scene, turning the [TRANSPOSE] knob sets the
transposition to the value of the knob.
Specifies that the [TRANSPOSE] knob is used for the transpose function.
Specifies that the [TRANSPOSE] knob is used for adjusting the volume of the built-in speakers.
Specifies that the [TRANSPOSE] knob is used for adjusting the volume for headphones
connected to the PHONES jack, or of the signal output from the OUTPUT jack.
Specifies that the [TRANSPOSE] knob is used for simultaneously adjusting the volume of
the built-in speakers and of headphones connected to the PHONES jack, as well as the
signal output from the OUTPUT jack.
Sets the system transpose value.
Sets the display contrast.
Larger values make the display brighter.
Sets the time it takes for the display to turn off when the instrument is not being used.
When set to "Always On, " the display is always on.
When you press the [SCENE] or [MENU] button while the display is off, the display turns
back on.
Sets the time before the instrument automatically turns off.
The power to this unit will be turned off automatically after a predetermined amount of
time has passed since it was last used for playing music, or its buttons or controls were
operated (Auto Off function).
If you don't want the unit to turn off automatically, change this setting to "Always On. "
Sets the volume of the built-in speakers.
Specifies the volume that is output from the OUTPUT jack or from headphones connected
to the PHONES jack.
Sound is not output from the built-in speakers.
Sound is output from the built-in speakers.
Sound is not output from the built-in speakers if headphones or a cable are connected to
the PHONES jack.
Sets whether the audio signal output from the PHONES or OUTPUT jack is outputted in
stereo or in mono.
Notes are not sustained.
Notes are sustained at the volume they are played when you blow once.
Inhale to stop the note.
Pressing the performance keys produce notes according to your fingering.
We recommend these settings if you're a beginning wind
instrument player.
Fortissimo (ff ) can be produced even by blowing relatively
softly.
This is the usual setting.
We recommend these settings for experienced wind
instrument players.
Fortissimo (ff ) is produced only when you blow quite strongly.
L5
L1
M
H1
H5
Breath force
3
Advertisement
Table of Contents
