Convenient Functions; Advanced Editing Of E Ect Parameters; Saving E Ects - Roland eBand JS-8 Owner's Manual

6
Chapter

Convenient Functions

Advanced Editing of E ect Parameters

1. Press [EFFECTS].
Screen 1
Effect
patch
number
Use the dial to select
the effect category.
Screen 5 (Example: AMP)
Use the cursor
buttons and
Press [ENTER] to
dial to edit the
switch the effect
parameters.
on and off.

Saving E ects

1. After editing the effect, press [MENU].
2. Use the cursor buttons to select WRITE, and then press [ENTER].
Use the left and
right cursor but-
tons and the dial to
name the effect.
20
Press the right
cursor button to
switch to Screen
2, 3.
Select the effect
patch you want
to edit here.
Press the right
cursor button to
access additional
parameters for the parameters for the
selected effect. selected effect.
Press [MENU],
then select WRITE then select
to save the edit. to save the edit.
Select the ef-
fect patch number
you want to save
your changes to.
Press [ENTER] to save the
effect to the selected ef-
fect number.
Screen 2
Screen 3 Screen 3
Screen 4
Use the cursor
buttons to select
the effect you
want to edit.
Use the dial
to switch the
selected effect
on and off.
Switching effects with PATCH SELECT before you save an
edited effect will cause the edited content to be lost.
To Copy an E ect Patch
Call up the effect patch you want to copy, then merely
save that effect patch as it is to the desired effect patch
number.
Press the right
cursor button to
switch to Screen 4.
To adjust the sound,
move the cursor's posi-
tion with the cursor
buttons and dial.
Pressing
[MENU] enables
various editing
procedures.
Press [ENTER]
to switch to the
settings screen for
the selected effect
(Screen 5).
(Example) AMP
ON:
OFF: