Registering By Phone - Honeywell GSMX4G Installation And Setup Manual

GSMX4G / GSMXCN4G Installation and Setup Guide
If the PIN is valid, the new communicator is registered and
Registration
the old unit unregistered. Additionally, AlarmNet sends a
SUCCESS
substitution alarm to the central station.
If you entered an invalid PIN, the appropriate message is
Registration
displayed depending on which account number is being
BAD
replaced (see above for exact wording). The registration
process is repeated.
NOTE: Each attempt causes a substitution alarm to be sent

Registering by Phone

You can register the communicator by calling the AlarmNet Support at 1-
800-222-6525 (Option 1). (Monday–Friday 8:00 am to 9:00 pm, Saturday 9:00
am to 5:30 pm EST) You will need the following information:
MAC ID and CRC (located on the box and inside the communicator).
•
Subscriber information (provided by the central station), including a
•
city code, CSID, and subscriber ID.
When Instructed to do so, triple click the TEST MESSAGE /
•
REGISTRATION switch.
to the central station.
– 29 –