Honeywell GSMX4G Installation And Setup Manual page 21

GSMX4G / GSMXCN4G Installation and Setup Guide
PROMPTS ENTRY
17
Remote
Access
Y/N (N)_
18
Keypad
Address
(28)_
19
Supervi-
sion
(24
Hours)_
20
Old Alarm
Time
(10
Minutes)_
OPTIONS
[Y], [N] Press [Y] to allow the end user to
access their system via a website.
Availability of this service is
controlled by the dealer via the
web-based programming tool on
the AlarmNet Direct website.
[01-30] NOTE: This prompt will only
appear if the Remote Access
feature has been enabled.
Must be programmed if using the
Remote Access feature. Enter the
appropriate device address.
• 30 Day The AlarmNet network must hear
at least one supervisory message
• 24 Hour
from the communicator during
• None
this supervision period;
otherwise, AlarmNet notifies the
central station that a communica-
tion failure has occurred. (If the
supervision period is changed
after registration, you must re-
register the communicator.)
Press the [space] key to scroll
through choices.
UL/ULC NOTE: Must be 24
hour.
The old alarm time sets how long
• 10
an undeliverable alarm is retried
Minutes
for delivery to the central station.
• 15
If the message is not validated, it
Minutes
is retried until the old alarm time
• 30
is reached or the message is
Minutes
validated.
• 1 Hour
Press the [space] key to scroll
• 2 Hours
through choices.
• 4 Hours
UL/ULC NOTE: Must be 10
• 8 Hours
minutes.
• 12 Hours
• 24 Hours
– 19 –
DESCRIPTION