Diagnostic Commands; Module Identification Displays - Honeywell GSMX4G Installation And Setup Manual

GSMX4G / GSMXCN4G Installation and Setup Guide

Diagnostic Commands

The 7720P programming tool can be used to view the connectivity settings
and options. To invoke diagnostic commands; such as [A], [B], [C], etc., the
[shift] key MUST used. For example, [shift] + [A] displays the software
revision.

Module Identification Displays

[A]
7845GSM RIS
x.x.xx
mm/dd/yy
[B]
MAC
xxxxxxxxxxxx
MAC CRC
yyyy
SCID xxxxx
xxxxx xxxxx
xxxxx
IMEI
xxxxxxxx
xxxxxx x
[C]
Mon 01 Jan
2001
05:48:39 am
[D]
Encryption
Test
AES Passed!
Software Revision
"x.x.xx" indicates the installed software revision.
Mm/dd/yy indicates month, day and year of the
revision.
MAC Address
"xxxxxxxxxxxx" indicates the communicator's unique
identification number.
"yyyy" indicates the MAC CRC number. These numbers
are located on the box and inside the communicator.
Press the [Space] key to go to the next field.
Press the [BS] key to go to the previous field.
SCID Display
Displays the identification number assigned to the
SIM card (SCID) in this device.
Press the [Space] key to go to the next field.
Press the [BS] key to go to the previous field.
IMEI Display
Displays the identification number assigned to the
GSM module in this communicator.
Press the [Space] key to get the MAC Address.
Press the [BS] key to go to the previous field.
Time
Retrieves the current date and time from the
AlarmNet network in Greenwich Mean Time
(GMT). This display confirms that the
communicator is in sync with network.
Encryption Test
Performs a self-test of the AES encryption
algorithm.
– 30 –