Registering By Phone; Diagnostic Commands; Module Identification Displays - Honeywell GSMX Installation And Setup Manual

GSMX Installation and Setup Guide

Registering by Phone

You can register the module by calling the AlarmNet Support at 1-800-222-
6525 (Option 1). You will need the following information:
• MAC ID and CRC (located on outside of box and on label inside
module).
• Subscriber information (provided by the central station), including a
city code, CSID, and subscriber ID.
• When instructed to do so, triple-click the Test
Message/Registration switch to complete the registration.

Diagnostic Commands

The 7720P programming tool can be used to view the connectivity settings
and options. To invoke diagnostic commands; such as [A], [B], [C], etc., the
[shift] key MUST used. For example, [shift] + [A] displays the software
revision.

Module Identification Displays

[A]
7845GSM
x.x.xx
mm/dd/yy
[B]
MAC
xxxxxxxxxxxx
MAC CRC
yyyy
SCID xxxxx
xxxxx
xxxxx
xxxxx
IMEI
xxxxxxxx
xxxxxx
x
Software Revision
"x.x.xx" indicates the installed software revision.
Mm/dd/yy indicates month, day and year of the
revision.
MAC Address
"xxxxxxxxxxxx" indicates the GSMX's unique
identification number.
"yyyy" indicates the MAC CRC number. These numbers
are found on the label on the module, as well as the label
on the box.
Press the [Space] key to go to the next field.
Press the [BS] key to go to the previous field.
SCID Display
Displays the identification number assigned to the
SIM card (SCID) in this device.
Press the [Space] key to go to the next field.
Press the [BS] key to go to the previous field.
IMEI Display
Displays the identification number assigned to the
GSM module in this device.
Press the [Space] key to get the MAC Address.
Press the [BS] key to go to the previous field.
– 23 –