ABB FSM4000-SE41F Operating Instruction page 60

Parameterization
ENTER function for magnet stick operation
The ENTER function is initiated when the DATA/ENTER sensor is activated for more than 3
seconds. The display flashes to indicate that the function is active.
There are two different methods of entering data:
• Numeric entry
• Entry from specified table
Important
When entering data, the values are checked for plausibility and, if necessary, rejected with an
appropriate message. The limit values (min/max) are displayed in the 3rd and 4th lines.
60 FSM4000 D184B140U02