ABB FSM4000-SE41F Operating Instruction page 67

Submenu/parameter
Submenu
Primary Setup
D184B140U02
Value range
Span Cs View only
100.0 %
View only
Zero Cz
0.0 %
View only
Phase
90
View only
Referencevoltage
70 mV
View only
Meter factor
1.0
View only
Order-Number
„-----------------------"
Option available only
with "Older Model"
50, 60 Hz
Frequency
50 Hz
Type of primary Select the original
model
DS4_
Select the size of the
Meter size
connected flowmeter
100 mm 4 in
sensor
Enter the reference
Referencevoltage
voltage
70 mV
Meter factor Numeric entry
1.0
Comment
Flowmeter sensor span value Cs.
Flowmeter sensor zero value Cz. For "Older model"
always 0%.
Phase relationship between reference and signal
voltages.
Display the reference voltage, for "Older Model" selection.
Not displayed for model 10D1422.
Displayed only if flowmeter sensor 10D1462/72 is
selected
Display the ABB order number for the flowmeter sensor.
Display required for "Older Model". Use ENTER and
STEP to access the parameters: Mains Frequency, Type
of Sensor, Meter Size and Reference Voltage. Not
displayed, if new sensor (SE41F/SE21) is selected. See
chapter 11.
Displays the mains frequency for the flowmeter sensor.
Option available only with new "Flowmeter sensor".
Display the connected flowmeter sensor model:
Select the size of the flowmeter sensor. Option available
only with "Older Model".
Display the reference voltage, only for "Older Model"
option, see name plate for flowmeter sensor. Not
displayed for models 10D1422, 10D1462/72.
Display the meter factor, only for older model
10D1462/72; see name plate for flowmeter sensor. See
chapter 11.
FSM4000
Parameterization
67