Device Detection; Fig.: Device Detection - Not Started Yet - Solar-Log 200 Installation Manual

18.3 Device Detection

During the Device Detection process, all of the predefined components in the Device Definition menu
which are connected to the Solar-Log™ interfaces are searched for and recognized. During the Device De-
tection process, the Solar-Log™'s internal data structure is prepared for these devices.
Procedure:
•
Select Configuration | Devices | Detection from the menu.
•
The devices which were predefined in the Device Definition menu are displayed in the overview.

Fig.: Device detection - not started yet

•
START Device Detection.
•
The Device Detection goes from the top listed interface to the bottom listed interface when
searching for devices.
The progress of the device detection is displayed in a window that automatically appears.
•
The detected devices
•
If all of the devices on a bus have been
is then continued on the next bus.
•
The Device Detection is completed once all of the buses have been checked.
Status message: New device detected, the data is being reformatted.
•
The Solar-Log™ reboots itself.
Note!
Once the detection has been successfully completed, individual device classes can be
removed with the
tion.
are displayed with the number of devices
detected,
symbol without having to initialize the complete device configura-
per bus
.
the rest of the search can be skipped. The search
Configuring connected devices
93