Carrying Out The Initial Set Up Of The Solar-Log 1200; Initial Installation Solar-Log 1000 And 2000; Carrying Out The Initial Set Up Of The Solar-Log 2000 - Solar-Log 200 Installation Manual

Installation

14.3.1 Carrying out the initial set up of the Solar-Log 1200

The initial configuration of Solar-Log 1200 is made via a Web browser.
Procedure:
•
Enter the address
•
A selection of display languages is displayed.
•
Select the desired
•
The welcome screen then appears.
•
In the navigation bar at the top, click on
•
The following menus have to be configured:
Internet (Chapter 17 on page 87)
Network (Chapter 16.1 on page 79)
Device (Chapter 18 on page 91)
Plant (Chapter 19 on page 104) and
System (Chapter 22 on page 124)

14.4 Initial installation Solar-Log 1000 and 2000

The initial configuration of Solar-Log
be established and it is best to connect the Solar-Log 2000 to an Internet router.
All settings made at the initial startup can be changed at a later time.

14.4.1 Carrying out the initial set up of the Solar-Log 2000

The initial configuration of Solar-Log 2000 is made via a Web browser.
Procedure:
•
Enter the address
•
A selection of display languages is displayed.
•
Select the desired
•
The welcome screen then appears.
•
In the navigation bar at the top, click on
•
The following menus have to be configured:
Internet (Chapter 17 on page 87)
Network (Chapter 16.1 on page 79)
Device (Chapter 18 on page 91)
Plant (Chapter 19 on page 104) and
System (Chapter 22 on page 124)
68
http://solar-log
in the address bar of the web browser.
Display Language .
Configuration
is made via a Web browser. All of the device connections need to
1200
http://solar-log in the address bar of the web browser.
Display Language .
Configuration
.
.