Fig.: Adding Components - Solar-Log 200 Installation Manual

Configuring connected devices
The following window appears:

Fig.: Adding components

The connected components are selected in the
defined:
•
Battery
•
Hybrid System
•
Smart Appliances
•
Switch
•
Sensor
•
Inverter
•
Meter
Depending on the device class and/or the selected
Type Interface
,
Furthermore, an existing
vice connected to this bus is increased.
Note!
If the device class is correct, confirm the selection with OK. Define additional connected device classes as
described.
If all of the connected components have been selected and confirmed with OK, an overview is displayed in
the interface assignments. (See illustration: "Overview of the selected components")
88
Baud rate
and .
Wireless Package
Caution: Using different manufacturers on the same serial bus may cause communication
problems.
Only the network interface (Ethernet) can have multiple assignments according to our
component database at www.solar-log.com.
Device class
box. The following device classes can be
Manufacturer
, additional boxes visible:
can be activated here and the expected reply time for a de-