System Configuration; Access Control - Solar-Log 200 Installation Manual

22 System Configuration

Configuration | System
The
tabs:
•

Access control

•
Language/Country/Time
•
Display
•
Licenses
•
Firmware
22.1 Access control
Access protection for different parts of the Solar-Log™ can be configured in this menu. The following
sections can be restricted with pin codes or passwords
•
Access protection for the display
•
Access protection for the browser menu
•
Displaying advanced configuration
Access protection for the display (only Solar-Log 1000, 1200 and 2000)
A pin code can be activated to restrict access to the Solar-Log™'s display. The pin code may contain a
maximum of 8 numerical digits.
Access at the display can be restricted for the entire display or just the settings section.
Procedure:
•
Enter the pin code .
•
Enter the pin code again
•
Select restricted Sections
•
SAVE
the settings.
Access protection for the browser menu
In this section, the following parts of the Solar-Log™'s browser menu can be
restricted with a password:
•
User
General access to the
•
Installer
Configuration
Access to the
•
Feed-in management
Access to the Configuration | Feed-in Management
The default password for access to the Feed-in Management menu is PM. Access for users and installers is
not restricted.
menu has the basic settings for the Solar-Log™ and contains the following
.
by checking them.
Browser menu
menu
menu
System Configuration
123