Basic Settings | Portal Menu; Usb Menu - Solar-Log 200 Installation Manual

Next
By tapping on , the second
On the second page of the menu, the
•
network router,
•
gateway and alternate DNS server can be configured.
The configuration can be saved and ended by tapping on Save or

26.6.2 Basic Settings | Portal menu

The following selections can be made from this menu:
•
Solar-Log™ WEB
•
Server
The following portals can be selected under Solar-Log™ WEB:
•
Commercial Edition (Full Service)
•
Classic 2nd Edition
An HTTP test transmission can be performed from the
Procedure:
1. Enter the address listed in the "
Activate transfers
2. Check the
3. Click on Next .
4. After that, start the test transmission by click on the "
The transfer is in progress.
A window with "
5. After the test is successful, "
6. In the Status & Test
Error
"OK" in the (last export) field.

26.7 USB menu

The USB connection on Solar-Log™ devices allows data such as firmware, configurations and yield informa-
tion to be imported and backups to be saved.
The USB menu contains the following functions:
•
Save all data
•
Import yield data
•
Import configuration
•
Firmware update
Saving all data section
The function saves all of the inverter data and the configuration file to the USB stick.
Procedure:
•
Select Save all data.
•
Start Data backup .
•
Data is prepared.
•
The data is copied to the \backup directory on the USB stick.
•
The following files are now saved in the backup folder on the USB stick:
solarlog_backup.dat
solarlog_config.dat
•
This data can be saved elsewhere as a backup or imported into the Solar-Log™ again.
page of network settings appears.
Access data
" received in the
option.
" is displayed.
Status 0 = OK, no error
section, now the date and time of the last export are listed in the
Direct Device Configurations (Solar-Log 1200 and 2000)
.
Server .
Server
field.
Connection Test
" button.
" is displayed in the same window. Click on
Next
.
Date field and
175