Electric Current - Solar-Log 200 Installation Manual

Electric current

5 Electric current
Danger!
Danger!
Caution!
Caution!
Caution!
Caution!
14
Risk of death by electric shock if inverters are opened.
Never open the inverter housing when the inverter is connected to power.
See Switching off the inverters on page 37.
Always read the installation and safety instructions given in the manual for the corre-
sponding inverter.
Danger of death if there is condensation in the power supply unit when started!
Condensation can occur if the power supply unit is moved directly from a cold environ-
ment to a warm environment.
Wait until the temperatures have equalized before doing this.
Damage to the electrical components in inverters and on interface cards due to elec-
trostatic discharge.
Avoid contact with component connections and plug contacts.
Before picking up the component, ground yourself by holding the protective conduc-
tor (PE) or the unpainted part of the inverter housing.
Damage to the electrical components of the Solar-Log™ due to the wiring of the Solar-
Log™!
Switch the Solar-Log™ off;
See Chapter 11.1 on page 37
Risk of electric shock.
Do not use the unit if the housing of the external power supply unit is damaged. A
damaged power supply unit must be replaced by one of the same type and from the
same manufacturer in order to avoid danger.
The Solar-Log™ may only be used indoors or enclosed spaces.
The device has the protection class IP20.