Analog Channels - EverFocus VANGUARD 16x8 User Manual

Add Selected: Click to add the multiple selected IP cameras to the system. Select the
desired IP cameras from the Section 1 list by checking the checkboxes and then click the
Add Selected button, the IP cameras will be added to the system. You can see the IP
cameras listed on Section 3 list.
Delete Channel: Click to delete the IP cameras from the system. Select the IP cameras
by checking the checkboxes from the list in Section 3 and then click the Delete Channel
button. The selected IP cameras will be deleted from the system.
Cancel: Click to cancel and leave the page.

4.1.1.1.2 Analog Channels

You can enable or disable the connected analog cameras on this page. Please ensure the
analog cameras have been connected to the real panel of the DVR.
To enable the analog cameras, check the channel checkboxes; to disable the analog cameras
(disable streaming), uncheck the checkboxes. Click the Save button to save the settings.
Click Save to save the settings or Cancel to cancel and leave the page.
VANGUARD 16x8 / VANGUARD 8x4 / VANGUARD 4x2
32