Analog Channels - EverFocus VANGUARD 16x8 User Manual

VANGUARD 16x8 / VANGUARD 8x4 / VANGUARD 4x2

5.4.1.2 Analog Channels

You can enable / disable the connected analog cameras using this page.
Switch: Switch to the right to enable the channel or switch to the left to disable the channel.
Refresh: Click to refresh the page.
Save: After switching the buttons on the table, click Save to save the settings.
Close All Ch: Click to switch-off all cameras.
Open All Ch: Click to switch-on all cameras.
105