Ntp - EverFocus VANGUARD 16x8 User Manual

VANGUARD 16x8 / VANGUARD 8x4 / VANGUARD 4x2

4.1.4.1.3 NTP

You can configure NTP settings on this page.
NTP: Select Enable to enable the NTP function. When NTP function is enabled, the system
will calibrate the system time at 00:07:50 daily and every time when the system is started up.
Server Address: Select a NTP server.
Time Zone: Select a time zone.
Update Now: Click to calibrate the system time.
Click Default to return to factory default value, Save to save the settings, or Cancel to cancel
and leave the page.
76