VANGUARD 16x8 / VANGUARD 8x4 / VANGUARD 4x2
5.4.2 Record
You can configure the record settings on this page.
5.4.2.1 Record Settings
You can configure the basic record settings on this page.
Channel: Select a channel to configure the record setting individually.
Stream Mode: Select Main Stream or Dual Stream to record on this channel.
Record: Switch to the right to Enable the record function.
Pre-Record: Switch to the right to Enable pre-recording for motion detection or I/O trigger
record.
Click Refresh to refresh the page. Click Save to save the settings.
Click Copy to apply the same configurations from the current channel to the desired
channels. Select the desired channel(s) and then click the Copy button, the selected
channel(s) will be applied with the same configurations.
108