Video Adjust (Apply To Analog Camera Only) - EverFocus ENDEAVOR EDRHD-2H14 User Manual

Record Audio: (Camera 1 screen only) Check this box to enable audio recording on the DVR.
PTZ ID: When using a PTZ Camera, in order to control the camera from the DVR this ID must match the
RS-485 ID used by the connected camera. Click "On" to confirm selection, "Off" to cancel PTZ control for
this camera. When PTZ ID is ON, a drop down menu will appear; set the PTZ ID address used to control
this camera in that menu.
Apply To: This button can be used to copy the recording settings to other cameras. Select which camera(s)
you wish to copy to. "Select All" selects all cameras, "Unselect All" deselects all cameras. Click "OK" to
copy the settings or "Cancel" to exit without copying.
Note: Analog camera settings cannot be applied (copied) to HD-CCTV camera.

4.3.2 Video Adjust (apply to analog camera only)

Figure 4-3 Camera Menu – Video Adjust
50