Events - EverFocus VANGUARD 16x8 User Manual

VANGUARD 16x8 / VANGUARD 8x4 / VANGUARD 4x2

4.1.5.2 Events

You can configure the system event settings on this page.
Event Type: Select an event type from the drop-down list.
Enable: Check the box to enable the function.
Show Message: Check the box to enable the function. When the selected events have been
triggered, an event message will be displayed on the live screen.
Send Email: Check the box to enable the function. When the selected events have been
triggered, the DVR will send an email alert to the receiver. Note that for this function to
work, you have to set up the Email function in advance (refer to 4.1.1.3.2 Email).
Alarm Out: Check the box to enable the alarm output.
Alarm Output: Set up an alarm output time (duration) when an alarm is triggered.
Buzzer: Set up the time for buzzer to sound when an event is triggered.
Click Default to return to factory default value, Save to save the settings, or Cancel to cancel
and leave the page.
87