Snapshot Schedule - EverFocus VANGUARD 16x8 User Manual

VANGUARD 16x8 / VANGUARD 8x4 / VANGUARD 4x2

5.4.3.2 Snapshot Schedule

You can configure the snapshot schedule on this page.
Channel: Select a channel to configure the snapshot schedule setting individually.
Week: Select a day from the drop-down list.
Normal: Click the Normal button and then move your mouse cursor over the schedule time
blocks. Click and drag on the schedule time blocks to draw the blocks with green color,
which will be applied with normal snapshot function. To deselect the blocks, click and drag
on the green blocks to select again.
Motion: Click the Motion button and then move your mouse cursor over the schedule time
blocks. Click and drag on the schedule time blocks to draw the blocks with yellow color,
which will be applied with motion snapshot function. To deselect the blocks, click and drag
on the yellow blocks to select again.
Alarm: Click the Alarm button and then move your mouse cursor over the schedule time
blocks. Click and drag on the schedule time blocks to draw the blocks with red color, which
will be applied with alarm snapshot function. To deselect the blocks, click and drag on the
red blocks to select again.
Copy (day): You can apply the same configurations from one day to another. Select a day
from the drop-down list first and then select a desired day (or All) from the To drop-down
list, click the Copy button, the selected day(s) will be applied with the same configurations.
Copy (channel): You can apply the same configurations from one channel to the desired
channels. Select a channel from the drop-down list first and then select a desired channel (or
All) from the To drop-down list, click the Copy button, the selected channel(s) will be applied
with the same configurations.
Click Save to save the settings or Refresh to refresh the page.
115