Remote Live View Window - EverFocus VANGUARD 16x8 User Manual

5.2 Remote Live View Window

After logging in the system, the below Live View Window appears.
1
10
No. Name
Camera List
1
Button
Main Stream/
2
Sub Stream
3 Live Channel
4 Live
5 Playback
6 Settings
Color / PTZ
7
Setting
VANGUARD 16x8 / VANGUARD 8x4 / VANGUARD 4x2
2
11
Description
Click to hide or display the Camera List.
Click to switch all the live streams to Main Stream or Sub Stream. If you
want to set up some streams for Main or some streams for Sub, on the
Camera List, you can click the Stream icon of the specific channels and
then select Main Stream or Sub Stream. To configure Main Stream
parameters, refer to 5.4.2.3 Main Stream. To configure Sub Stream
parameters, refer to 5.4.2.4 Sub Stream.
You can perform the following functions on each channel:
a. Double click on a channel can display the channel in full screen. To
exit the full screen mode, double click on the channel again.
b. You can drag and drop a channel to the desired position on the layout.
Click and hold on a channel, a Drag Channel icon will display. Drag and
drop the channel to the desired position on the layout.
Click to display the Live View window.
Click to enter the Playback page. Please refer to 5.3 Playback.
Click to enter the Settings page. Please refer to 5.4 Settings.
Click to display or hide the Color / PTZ Setting Panel on the right-side of
the Live View window. Please refer to 5.2.3 PTZ Setting Panel and 5.2.4
Color Panel for more details.
3 4
92
5 6 7 8
7
9