Main Stream - EverFocus VANGUARD 16x8 User Manual

5.4.2.3 Main Stream

You can configure the main stream record, resolution and etc. for individual channel.
For Analog Cameras:
Channel: Select a channel to apply with the following configurations.
Resolution: Select a recording resolution based on your TV or monitor capability.
FPS: Select a record FPS (frames per second) for the selected channel. The higher the value,
the better the image quality. Note if experiencing system lag or stutter, please lower down
the FPS.
Bitrate Control: Select CBR (constant bitrate) or VBR (variable bitrate) for the selected
channel. If VBR is selected, select a quality type from the drop-down list next to Bitrate
Control.
Bitrate Mode: Select User-defined to set up bitrate manually; or Predefined to auto-select
bitrate.
Bitrate: Set up a bitrate for the selected channel.
AMR: Check the box to record the Motion and I/O alarm recordings with the max FPS and
Bitrate.
Audio: Check the box to enable the audio function.
Click Save to save the settings or Refresh to refresh the page.
Click Copy to apply the same configurations from the current channel to the desired
channels. Select the desired channel(s) and then click the Copy button, the selected
channel(s) will be applied with the same configurations.
VANGUARD 16x8 / VANGUARD 8x4 / VANGUARD 4x2
110