Sub Stream - EverFocus VANGUARD 16x8 User Manual

VANGUARD 16x8 / VANGUARD 8x4 / VANGUARD 4x2

4.1.1.2.4 Sub Stream

This function is only available for analog cameras. You can configure the sub stream record,
resolution and etc. for individual channel.
Channel: Select a channel to apply with the following configurations.
Resolution: Select a recording resolution based on your TV or monitor capability.
FPS: Select a record FPS (frames per second) for the selected channel. The higher the value,
the better the image quality. Note if experiencing system lag or stutter, please lower down
the FPS.
Bitrate Control: Select CBR (constant bitrate) or VBR (variable bitrate) for the selected
channel. If VBR is selected, select a quality type from the drop-down list next to Bitrate
Control.
Bitrate Mode: Select User-defined to set up bitrate manually; or Predefined to auto-select
bitrate.
Bitrate: Set up a bitrate for the selected channel.
Audio: Check the box to enable the audio function.
Copy: You can apply the same configurations from one channel to the desired channels.
Select a channel from the Copy drop-down list first and then select a desired channel (or All)
from the To drop-down list, click the Copy button, the selected channel(s) will be applied
with the same configurations.
Click Default to return to factory default value, Save to save the settings, or Cancel to cancel
and leave the page.
40