Analog Setting - EverFocus VANGUARD 16x8 User Manual

VANGUARD 16x8 / VANGUARD 8x4 / VANGUARD 4x2

4.1.1.1.3 Analog Setting

You can configure camera OSD or image settings of analog cameras on this page.
Channel: Select a analog channel from the drop-down list.
Channel Name: Input a name for the camera.
Show Name: Select Enable if you want to display camera name on the live stream.
Record Time: Select Enable if you want to record time on recording video streams.
OSD Position: Click to set up the OSD position freely.
Image: Click to adjust image configurations including Hue, Brightness, Contrast and
Saturation.
Signal Type: Configure the signal type (such as TVI or AHD) of the connected camera.
Covert: Select to covert the camera stream on the live view. The channel will be black-out on
the Live Window, however, the system will still record the streams.
Show Time: Select Enable if you want to display system time on the live stream.
Copy: You can apply the same configurations from one channel to the desired channels.
Select a channel from the Copy drop-down list first and then select a desired channel (or All)
from the To drop-down list, click the Copy button, the selected channel(s) will be applied
with the same configurations.
Click Default to return to factory default value, Save to save the settings, or Cancel to cancel
and leave the page.
33