Rtsp - EverFocus VANGUARD 16x8 User Manual

4.1.1.4.5 RTSP

You can configure the RTSP setting on this page.
RTSP Enable: Select Enable from the drop-down list to enable the RTSP function.
Verify: Select Enable from the drop-down list to enable the verify function.
RTSP Port: Keep 554 as RTSP port.
RTSP URL Syntax:
Camera Type Syntax
IP Cameras rtsp://[IP Address]:[Port]/ip[A]/[B]
FHD Cameras rtsp://[IP Address]:[Port]/ch[A]/[B]
* IP Address: The IP address of the DVR
* A: Channel number. 01 (ch1), 02 (ch2), and so on.
* B: Stream Type: 0 (main stream), 1 (sub stream)
Click Default to return to factory default value, Save to save the settings, or Cancel to cancel
and leave the page.
VANGUARD 16x8 / VANGUARD 8x4 / VANGUARD 4x2
Example
rtsp://192.168.31.33:554/ip05/1
rtsp://192.168.31.33:554/ch01/0
50