Snapshot - EverFocus VANGUARD 16x8 User Manual

VANGUARD 16x8 / VANGUARD 8x4 / VANGUARD 4x2

5.4.3 Snapshot

You can configure the network settings on this page.
5.4.3.1 Snapshot
You can enable the Auto Snapshot or Manual Snapshot functions on this page.
Channel: Select a channel to apply with the following configurations.
Stream Mode: Select Main Stream or Sub Stream.
Normal Interval: Configure an interval to automatically take a snapshot.
Alarm Interval: Configure an interval to automatically take a snapshot when events occur.
Auto Snapshot: Switch to the right to Enable the Auto Snapshot function on the local side.
Note for this function to work, you have to configure Snapshot Schedule in advance (refer to
5.4.3.2 Snapshot Schedule).
Manual Snapshot: Switch to the right to Enable the function. To perform the Manual
Snapshot function on the local side, click the Manual Snapshot icon on the Live Channel Tool
Bar (refer to 3.5 Live Channel Tool Bar).
Click Save to save the settings or Refresh to refresh the page.
Click Copy to apply the same configurations from the current channel to the desired
channels. Select the desired channel(s) and then click the Copy button, the selected
channel(s) will be applied with the same configurations.
114