Advanced; Maintain - EverFocus VANGUARD 16x8 User Manual

4.1.5

Advanced

You can configure the system maintenance and system event settings on this page.

4.1.5.1 Maintain

You can configure system maintenance on this page.
Default User: Select a default user from the drop-down list.
Auto Reboot: Select Enable to enable the Auto Root function. You can further set up the
reboot time below.
Reboot: If Auto Reboot is selected on the above section, set up the reboot time here for the
system to regularly reboot at the setup time.
Update: Click to upgrade the system firmware. Please restore the firmware file in a USB
storage device and insert the USB storage device to the system in advance. When this button
is clicked, an Update window appears. Select the firmware file and then click the OK button.
Note: Do not take out the USB storage device or turn off the power during system
upgrading. When the upgrade is done, the system will restart automatically.
Load Default: Click to initialize the system to the factory default. Click the button and select
the desired items to be restored to factory default.
Load Settings: Click to import the file of system parameters from a USB storage device.
Please restore the file in a USB storage device and insert the USB storage device to the
system in advance. Select a file and then click the OK button.
Save Settings: Click to export the file of system parameters to a USB storage device. Please
insert a USB storage device to the system in advance. Select a directory and then click the
OK button.
Click Default to return to factory default value, Save to save the settings, or Cancel to cancel
and leave the page.
VANGUARD 16x8 / VANGUARD 8x4 / VANGUARD 4x2
86