Email - EverFocus VANGUARD 16x8 User Manual

VANGUARD 16x8 / VANGUARD 8x4 / VANGUARD 4x2

5.4.4.2 Email

You can configure the email settings on this page.
Email: Switch to the right if you want to enable the Email function.
Schedule: Click to set up Email Schedule. Please refer to 5.4.4.2.1 Email Schedule.
Encryption: Select an encryption item or select Disable to disable the function.
SMTP Port: Assign the port number used by the SMTP server.
SMTP Server: Assign the SMTP (Email) server's name. Note that for more reliable email
service, use the server's IP address.
Username: Input the user name of the sender.
Password: Input the password of the sender.
Sender: Input the Email address of the sender (the DVR).
Receiver1-3: Input the Email address of the receiver. You can input 3 receiver email
addresses.
Interval: Configure an interval to send Emails when events occur.
Click Save to save the settings or Refresh to refresh the page.
Click Test Email to test whether the Email function is working normally.
Click Cancel to cancel the changes.
117