Email; Email Configuration - EverFocus VANGUARD 4x2H User Manual

4.4.3

Email

You can configure the email settings for email alerts, or configure the Email schedule on this
page.

4.4.3.1 Email Configuration

You can configure the email settings for email alerts. When events occur, the DVR will send
Email alert with a snapshot image (.jpg) to the receiver(s).
Email: Select Enable to enable the Email function.
Encryption: Select an encryption if your Email server requires the SSL or TLS verification.
Select Auto if you are not sure. Select Disable to disable this function.
SMTP Port: Enter the port number used by the SMTP server.
SMTP Server: Enter the SMTP server address of your Email.
User Name: Input your Email address.
Password: Input the password of the sender.
Sender: Input the Email address of the sender (the DVR).
Receiver1-3: Input the Email address of the receiver. You can input 3 receiver email
addresses.
Interval: Configure an interval to send Emails when events occur.
Test Email: Click to test whether the Email function is working normally.
Default: Click to apply the default setting.
Apply: Click to save the settings.
H.265 VANGUARD 4x2H / 8x4H / 16x8H
113