Table 45: Expanded Configuration, Tables 100 - WAGO -I/O-SYSTEM 750 Manual

WAGO-I/O-SYSTEM 750
750-658 CAN Gateway
Register 0 and 1 save the CAN ID.
Table 45: Expanded Configuration, Tables 100 ... 144, Register 0 ... 1: CAN ID
Register
bits
0.0 ... 0.12
0.13 ... 0.14 0x0
0.15
1.0 ... 1.15
Register 2 saves the parameters which define the transmission conditions and the
status bits contained in the telegram.
Table 46: Expanded Configuration, Tables 100 ... 144, Register 2:
IDE_RTR_DLC_SENDGROUP_SOC
Register
bits
2.0 ... 2.3
2.4 ... 2.7
2.8
2.9
2.10
2.11 ... 2.15 0x0
Register 3 saves the parameters that define the source (process image of output or
Register 4) from which the payload data byte values originated.
Manual
Version 1.2.0, valid from FW/HW-Version 01/01
Value range /
Possible values
0x0000...0x1FFF
0x0
0x1
0x0000 ... 0xFFFF
Value range /
Possible values
0x0
0x1, 0x8,
0x9 ... 0xF
0x0, 0x8,
0x9 ... 0xF
0x0
0x1
0x0
0x1
0x0
0x1
Description
Top 13 bits (Bit 16 ... 29) of the mapped
CAN telegram.
Reserved
Table configuration active
Table configuration inactive. Subsequent
tables will be ignored by the module.
Bottom 16 bits of the mapped CAN
telegram
Description
CAN telegram not assigned to a
transmission group.
CAN telegram assigned to transmission
group 1 ... 8.
Reserved
CAN telegram has payload data length 0 ...
8 [Byte]
Reserved
CAN telegram is a data frame (RTR = 0)
CAN telegram is a "Remote Transmit
Request Frame" (RTR = 1)
CAN telegram is of type Standard 2.0 A
CAN telegram is of type Extended 2.0 B
"Send On Change" deactivated
"Send On Change" activated
Reserved
Appendix 85