Function Area In The "Transparent Mode; Figure 26: Function Area In The "Transparent Mode - WAGO -I/O-SYSTEM 750 Manual

WAGO-I/O-SYSTEM 750
750-658 CAN Gateway
9.1.5

Function Area in the "Transparent Mode"

All CAN telegrams received are listed in the "Received" dialog.

Figure 26: Function Area in the "Transparent Mode"

The following interaction options are available:
• [Delete] button: Deletes the existing list.
• Scrollbar
The content of a CAN telegram to be sent can be defined in the "Send" dialog.
The following interaction options are available:
[Send] button: Sends the CAN telegram.
•
• CAN-ID input field: The CAN ID of the CAN telegram to be sent can be
entered here in hexadecimal format. If the input field is active, the
maximum value is 1FFFFFFFh. If the input field is not active, the maximum
value is 7FFh.
• IDE checkbox: If the checkbox is selected, CAN telegrams of type
"2.0B Extended" are sent with 29-bit identifier. If the checkbox is not
selected, CAN telegrams of type "2.0A Standard" are sent with 11-bit
identifier.
• RTR checkbox: If the checkbox is selected, CAN telegrams are sent with
activated "Remote Transmit Request". If the checkbox is not selected, data
telegrams are sent.
Manual
Version 1.2.0, valid from FW/HW-Version 01/01
Configuration and Parameterization 59