Register Overview; Table 56: Overview Of I/O Module Registers - WAGO -I/O-SYSTEM 750 Manual

WAGO-I/O-SYSTEM 750
750-658 CAN Gateway
10.4.2

Register Overview

The following section provides an overview of the I/O module registers.

Table 56: Overview of I/O Module Registers

No. Memory
Area
01-05 ---
06 RAM
07 ---
08 ROM
09 ROM
10 RAM
11 RAM
12 RAM
13 RAM
14 ROM
15 RAM
16 EEPROM ro
17-26 ---
27 RAM
28 EEPROM ro
29 EEPROM ro
30 EEPROM ro
31 RAM
32 EEPROM r/w
33 EEPROM r/w
34 EEPROM ro
35-52 ---
53 RAM
54-55 ---
56 EXTERN r/w
57 EXTERN r/w
58 EEPROM ro
59 EEPROM ro
60-62 ---
63 ROM
Pos : 104 /Dokumentati on allgemei n/Gli ederungsel emente/---Seitenwec hs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1
Manual
Version 1.2.0, valid from FW/HW-Version 01/01
Access Default
Value
--- 0x0000
ro Var.
--- 0x0000
ro 0x028F
ro 0x3031
ro Var.
ro Var.
ro Var.
ro Var.
ro 0x1000
ro Var.
0x0001
--- 0x0000
ro Var.
0x0000
0x0000
0x19AA
r/w Var.
Var.
Var.
0x0001
--- 0x0000
ro Var.
--- 0x0000
Var.
Var.
Var.
Var.
--- ---
ro Var.
Description
Reserved
Status byte of the internal bus
Reserved
WAGO article number (without 0750-)
Software index (String)
Number of physical channels
Number of logical channels
Fieldbus process data widths
Data type register
Software version
Alignment
Hardware version
Reserved
Reserved
WAGO order number, digits 10 - 12
WAGO order number, digits 7 - 9
WAGO order number, digits 4 - 6
Code word
Reserved
Process data layout
Mailbox 2.0 offset
Reserved
Parameter channel error code
Reserved
Parameter channel, Data
Parameter channel, Control
WAGO serial number (LSW)
WAGO serial number (MSW)
Reserved
Date of the firmware compilation
Appendix 91