Configuration And Parameterization - WAGO -I/O-SYSTEM 750 Manual

44

Configuration and Parameterization

Pos : 84 /Serie 750 ( WAGO-I/O-SYST EM)/In Betrieb nehmen/Konfigurieren und Parametrier en 750-658 @ 14\mod_1362048987466_21.doc x @ 113172 @ 1 @ 1
9 Configuration and Parameterization
You can commission, configure or parameterize in a variety of ways:
• WAGO-I/O-CHECK software
Software e!COCKPIT
•
• WAGO-I/O-PRO software with corresponding function block
"WagoLib_CAN.lib" of the WAGO-I/O-PRO library
• Configuration software using device description files (e.g. PROFIBUS-
GSD), see appendix, section "Configuration Using PROFIBUS GSD"
Configuration and parameterization via WAGO-I/O-CHECK and WAGO-I/O-
PRO make use of acyclic communication via the Mailbox and register
communication. For access via the Mailbox, a parameter access service is
provided by the I/O module. Register communication and the parameter access
service are explained in the appendix, chapter "Register Communication" or
"Mailbox 2.0 Transmission Method".
Pos : 85 /D okumentation allgemei n/Glieder ungs elemente/---Seitenwechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1
WAGO-I/O-SYSTEM 750
Version 1.2.0, valid from FW/HW-Version 01/01
750-658 CAN Gateway
Manual