Overview Of Parameters; Tables 50; Table 40: Expanded Configuration, Tables 50 - WAGO -I/O-SYSTEM 750 Manual

WAGO-I/O-SYSTEM 750
750-658 CAN Gateway
Pos : 101 /Serie 750 (WAGO-I/O-SYST EM)/Anhang/Parameterliste 750-658 @ 16\mod_1371744985255_21.doc x @ 123928 @ 23333 @ 1
10.3

Overview of Parameters

The structure and encoding for the parameters stored in the I/O module are
described below.
These parameters are organized as registers. A data volume of one word can be
stored per register. Several registers are combined into a table, as some parameters
require that a larger data volume be stored, or are closely tied to other parameters.
The first 64 registers of the I/O module play a special role. These "base registers"
can be addressed directly as 0 ... 63 using register communication. All of the
other registers are "extended registers", which must be addressed entirely via the
table and register index by the function blocks.
10.3.1 Table 0: Base Register
See Section "Register Communication" in this manual.
10.3.2 Tables 50 ... 55: Filter Configuration
Tables 50 ... 55 contain the parameters for filter configuration. These tables are
structured identically to one another and differ only with regard to their default
standard values.

Table 40: Expanded Configuration, Tables 50 ... 55

Register
0
1
2
3
4
5
*1: Most significant word
*2: Least significant word
Registers 0 and 1 save the CAN ID (lower limit) for the specific filter, Registers 2
and 3 the CAN ID (upper limit) for the specific filter.
Register 4 saves the activation status of the specific filter.
Manual
Version 1.2.0, valid from FW/HW-Version 01/01
Description
CAN ID LOW (MSW
CAN ID LOW (LSW
CAN ID HIGH (MSW)
CAN ID HIGH (LSW)
FILTER ENABLE
FILTER FIFO
HANDLING
Appendix
Acceptable value range
1
) 0x0000...0x1FFF
2
) 0x0000 ... 0xFFFF
0x0000...0x1FFF
0x0000 ... 0xFFFF
0x0000, 0x0001,
0x0000, 0x0001,
83