WAGO-I/O-SYSTEM 750
750-658 CAN Gateway
Do not select the "Overwrite" setting for protocol data!
The "Overwrite" setting should not be selected when protocol data is transmitted.
The protocol data may be unusable because all data of a CAN ID is required in
general. Select the "Keep All" setting here.
CAN telegrams of a defined range can also be received and sent via the mailbox.
Figure 36: Send CAN Telegrams via the Mailbox
To select this option, proceed as follows:
1.
Select the "Activated" checkbox.
2.
Specify the upper and lower limits. Enter the respective values in the
"Lower CAN ID" and "Upper CAN ID" input fields.
3.
Click the [Write] button.
Pos : 87 /D okumentation allgemei n/Glieder ungs elemente/---Seitenwechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1
Manual
Version 1.2.0, valid from FW/HW-Version 01/01
Configuration and Parameterization
69