Configuration" Dialog; Set Mailbox Diagnosis; Figure 22: Turn On Advanced Mailbox Diagnostics - WAGO -I/O-SYSTEM 750 Manual

WAGO-I/O-SYSTEM 750
750-658 CAN Gateway
Pos : 86.6 /Serie 750 (WAGO-I/O-SYST EM)/In Betrieb nehmen/Parametrier en mit WAGO-I/O-CH ECK/Konfigurieren und Parametrier en mit WAGO-I/O-CH ECK 750-0658 (F enster "Konfigurieren") @ 14\mod_1362059809203_21.doc x @ 113224 @ 3444 @ 1
9.1.3

"Configuration" Dialog

The "Configuration" dialog can be used to set the configuration for the process
image (see appendix).
9.1.3.1

Set Mailbox Diagnosis

Select the "On" setting in the "Mailbox Diagnosis" checkbox to turn on advanced
mailbox diagnostics.

Figure 22: Turn on Advanced Mailbox Diagnostics

If there is an error, an error code appears in the diagnostics area and an LED lights
up on the I/O module.
There is different signaling depending on the error type:
"ERROR" error type: A red LED lights up.
•
"WARNING" error type: A yellow LED lights up.
•
• "NOTIFICATION" error type: A green LED lights up.
A message is also generated in WAGO-I/O-CHECK depending on the error type:
• "Singleshot" error type: A message is sent if an error occurs.
"Appears/Disappears" error type: A message is sent if an error occurs
•
and an error has been corrected.
Manual
Version 1.2.0, valid from FW/HW-Version 01/01
Configuration and Parameterization 53