Figure 19: Buttons In The Main Menu; Table 22: Buttons On The Main Menu; 750-658 Can Gateway - WAGO -I/O-SYSTEM 750 Manual

WAGO-I/O-SYSTEM 750

750-658 CAN Gateway

Main Menu
The toolbar in the main menu contains the following buttons:

Figure 19: Buttons in the Main Menu

Table 22: Buttons on the Main Menu

Button
Manual
Version 1.2.0, valid from FW/HW-Version 01/01
Function
[Disconnect]
[Sniffer Mode]
[Transparent Mode]
[Mapped Mode]
[Read All]
[Write all]
[Retentive Saving]
Configuration and Parameterization
Description
Interrupts an existing connection to the I/O
module
Opens the function area for the "Sniffer"
operating mode and puts the I/O module in
this operating mode.
Opens the function area for the
"Transparent" operating mode and puts the
I/O module in this operating mode.
Opens the function area for the "Mapped"
operating mode and puts the I/O module in
this operating mode.
Lists are parameters from the I/O module
(see "Parameter Table" in the appendix).
Writes all parameters to the I/O module
(see "Parameter Table" in the appendix).
Saves all parameters of the I/O module in
retentive memory (see "Parameter Talble)
in the appendix).
47