WAGO-I/O-SYSTEM 750
750-658 CAN Gateway
[Change] button: Opens the "Change mapping rule" dialog to go to the
•
configuration dialog. All values except the CAN ID can be edited. The
interaction options are identical to those in the "Add mapping rule" dialog.
•
[Delete] button: Deletes the selected mapping rule.
•
[Read] button: Reads the list of mapping rules saved in the I/O module.
[Write] button: Saves the list of mapping rules in the I/O module.
•
Pos : 86.9 /Dokumentation allgemei n/Glieder ungs elemente/---Seitenwechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1
Manual
Version 1.2.0, valid from FW/HW-Version 01/01
Figure 32: "Change mapping rule" Dialog
Configuration and Parameterization
65