Pio" View; Figure 30: Function Area In The "Mapped Mode" - "Pio" View - WAGO -I/O-SYSTEM 750 Manual

WAGO-I/O-SYSTEM 750
750-658 CAN Gateway
9.1.6.2

"PIO" View

There are two different display windows in the function area:
• The process image-oriented display (left)
• The CAN display (right)
These show the current mapping rules for the process image of the output.
Figure 30: Function Area in the "Mapped Mode" – "PIO" View
The following interaction options are available:
• [Add] button: Opens the "Add mapping rule" dialog to go to the
configuration dialog. The following interaction options are available in the
dialog itself:
-
-
-
Manual
Version 1.2.0, valid from FW/HW-Version 01/01
CAN ID input field: The CAN ID of the CAN telegram to map can be
entered here in hexadecimal format.
DLC drop-down list: The user data length of the CAN telegram to be
sent can be selected here (value range 0 ... 8). Depending on the select,
corresponding user data input fields appear at the bottom of the
window.
Input field for data bytes (D0 ... D7): The position of the index entered
here describes the position in the process image, whose value is copied
to the respective data byte (D0 ... D7).
Configuration and Parameterization 63