WAGO-I/O-SYSTEM 750
750-658 CAN Gateway
10.1.3.2.1 Example
The following example shows use of the transmission channel during a send
operation (no full-duplex transmission):
Figure 41: Example of Send Operation
Pos : 95 /D okumentation allgemei n/Glieder ungs elemente/---Seitenwechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1
Manual
Version 1.2.0, valid from FW/HW-Version 01/01
Appendix
79