Setup Wizard; Basic Setup; General - CalAmp Viper 100 User Manual

Table 10 – Online Diagnostics RSSI Display
Value RSSI
0 NA
1 > -60.25 dBm
20 -65.00 dBm
255 < -123.75 dBm
X
4.2

SETUP WIZARD

Refer to Section 3.5.2 – Quick Start to use the Setup Wizard to configure your Viper.
4.3

BASIC SETUP

From the navigation frame, select Basic Setup to configure General, IP, Channel Table and Serial Port settings.

General Settings (see Section 4.3.1)

IP Settings (see Section 4.3.2)

Channel Table Settings (see Section 4.3.3)

Serial Port Settings (Section 4.3.4)

4.3.1 GENERAL

Figure 21 – Setup(Basic)General Settings
― Station Name. Enter a string up to forty characters in length.
Notes
The RSSI Value is not Available
The RSSI Value is greater than –60.25 dBm
RSSI is less than –123.75 dBm
RSSI = -60 – (X * 0.25), for X not equal to 0
001-5008-000_Rev12e.docx |
#9 Viper_SC_Manual_ Page 31