Subprogram Call Unit - HEIDENHAIN CNC PILOT 640 User Manual

2

Subprogram call unit

The unit calls the subprogram defined in L.
Unit name: SUBPROG / Called cycle: Any subprogram
Contour form:
L: Subprogram - Name
Q: Number of repetitions (default: 1)
LA-LF: Transmiss.value
LH: Transmiss.value
LN: Transmiss.value – reference to a block number as contour
reference
Is updated during block numbering.
Cycle form:
LI-LK: Transmiss.value
LO: Transmiss.value
LP: Transmiss.value
LR: Transmiss.value
LS: Transmiss.value
LU: Transmiss.value
LW-LZ: Transmiss.value
Cycle form:
ID1: Transmiss.value – text variable (string)
AT1: Transmiss.value – text variable (string)
BS: Transmiss.value
BE: Transmiss.value
WS: Transmiss.value
AC: Transmiss.value
WC: Transmiss.value
RC: Transmiss.value
IC: Transmiss.value
KC: Transmiss.value
JC: Transmiss.value
Accessing the technology database is not possible.
The tool call is not a mandatory parameter in this unit
Instead of the text
displayed that were defined in the subprogram. You
can also define help graphics for each line of the
subprogram
Further information:
198
transfer value, texts can be
"Subprograms", Page 484
HEIDENHAIN | User's Manual smart.Turn and DIN Programming | 12/2017
smart.Turn units | Units – Special operations