Structured Nc Program - HEIDENHAIN CNC PILOT 640 User Manual

NC programming | smart.Turn and DIN/ISO programming

Structured NC program

smart.Turn and DIN PLUS programs are structured in fixed
sections.
The following program sections are created automatically with a
new NC program:
PROGRAM HEAD: Contains information on the material of the
workpiece, the unit of measure as well as further organizational
data and setup information as a comment
CHUCKING EQUIPMENT: description of the workpiece clamping
situation
BLANK: The BLANK is stored. Programming a blank activates
Contour follow-up
FINISHED PART: The FINISHED PART is stored. It is advisable
to describe the complete workpiece as a FINISHED PART. The
units or fixed cycles use NS and NE to indicate the workpiece
section to be machined.
MACHINING: Use units and cycles to program the individual
machining steps. In a smart.Turn program, the START unit is
located at the beginning of the machining process, and the END
unit at the end
END: indicates the end of the NC program
If required, for example for machining with the C axis or when
programming with variables, you add further program sections.
Use the ICP editor (Interactive Contour Programming)
submode for describing the contours of workpiece
blanks and finished parts.
HEIDENHAIN | User's Manual smart.Turn and DIN Programming | 12/2017
1
43