HEIDENHAIN CNC PILOT 640 User Manual page 188

2
Cycle form:
JK: Cutter position
0: On the contour
1: Within the contour
2: Outside the contour
H: Mill cutting direction
0: Up-cut
1: Climb
P: Maximum infeed
I: Infeed-direction oversize
K: Contour-parallel oversize
FZ: Approach feed (default: active feed rate)
E: Reduced feed
R: Approach radius
O: Plunging behavior (default: 0)
0: Straight – the cycle moves the tool to the starting point;
the tool plunges at feed rate and mills the contour
1: In predrilling – the cycle positions the tool above the
hole; the tool plunges and mills the contour
NF: Position mark (only with O = 1)
Global form:
RB: Return plane
Further parameters:
Further information:
Further forms:
Further information:
Access to the technology database:
Machining operation: milling
Affected parameters: F, S, FZ, P
188
"Global form", Page 83
"smart.Turn unit", Page 78
smart.Turn units | Units – milling, lateral surface (C axis)
HEIDENHAIN | User's Manual smart.Turn and DIN Programming | 12/2017