Generating A Working Plan - HEIDENHAIN CNC PILOT 640 User Manual

7

Generating a working plan

After the working plan generation, consider the
following: If no chucking equipment has been defined
in the program as yet, TURN PLUS defines the chucking
equipment for a specific type of clamping/clamping
length and adjusts the cutting limitation accordingly.
Adapt the values in the finished NC program.
Generating a working plan with TURN PLUS:
Press the TURN PLUS soft key
TURN PLUS opens the most recently selected
machining sequence.
For the AWG, submode, press the AWG soft key
TURN PLUS shows the contours of the blank and
the finished part in the graphics window
Press the Simulation soft key
The AWG control graphic and program generation
are started
Press the Back soft key to return to the
TURN PLUS menu
Press the Back soft key to switch to smart.Turn
Use the name of the current program without
any changes
Alternatively, enter the name under which the
program should be saved
Press the Save soft key to overwrite the current
program
620
TURN PLUS | Automatic working plan generation (AWG) submode
HEIDENHAIN | User's Manual smart.Turn and DIN Programming | 12/2017