HEIDENHAIN CNC PILOT 640 User Manual page 208

3
ICP deburring, Y axis, face unit
The unit deburs a single hole or a hole pattern on the face. Using
ICP, you define the positions of the holes as well as further details.
Only the contour description (ICP) for the C axis or Y
axis is used for bore milling.
Unit name: G75_EN_ICP_Y / cycle: G75
Further information:
Contour form:
FK: Finished part contour – name of the contour to be
machined
NS: Starting block no. of contour – beginning of contour
section
B: Milling depth (default: countersinking depth from the contour
definition)
Cycle form:
H: Mill cutting direction
0: Up-cut
1: Climb
I: Contour-parallel oversize
K: Infeed-direction oversize
RB: Return plane (default: retract to starting position or to
safety clearance; diameter value with radial holes and holes in
the YZ plane)
Further forms:
Further information:
Access to the technology database:
Machining operation: Deburring
Affected parameters: F, S
208
"Bore milling G75", Page 381
"smart.Turn unit", Page 78
smart.Turn units for the Y axis | Units – Drilling in Y axis
HEIDENHAIN | User's Manual smart.Turn and DIN Programming | 12/2017