4
Rectangle, surface G315-Geo
G315 defines a rectangle in a lateral-surface contour.
Parameters:
Z: Center
CY: Center as linear value (reference: unrolled Reference
diameter)
C: Center (angle)
A: Angle to Z axis (default: 0°)
K: Length of rectangle
B: Breadth of rectangle
R: Chamf./round. (default: 0)
R > 0: Radius of rounding arc
R < 0: Chamfer width
P: Depth (default: P from G308)
Polygon on lateral surface G317-Geo
G317 defines a polygon in a lateral-surface contour.
Parameters:
Z: Center
CY: Center as linear value (reference: unrolled Reference
diameter)
C: Center (angle)
Q: Number edges
A: Angle to Z axis (default: 0°)
K: +edge lngth/-width a. flats
K > 0: Edge length
K < 0: Width across (Inside diameter)
R: Chamf./round. (default: 0)
R > 0: Radius of rounding arc
R < 0: Chamfer width
P: Depth (default: P from G308)
288
DIN/ISO programming | Lateral surface contours
HEIDENHAIN | User's Manual smart.Turn and DIN Programming | 12/2017