HEIDENHAIN CNC PILOT 640 User Manual page 54

1
Extras menu item
The Extras menu item contains the following functions:
DINplus word...: The editor opens the selection list with all
PLUS words in alphabetical order. Select the desired instruction
for program structuring or the input/output command. The editor
inserts the DIN PLUS word
Comment line...: The comment is inserted above the position of
the cursor
Constant definition...: The expression is inserted above the
position of the cursor. If the
present yet, it is also inserted
Assignment of variables...: inserts a variable instruction
L call external (the subprogram is in a separate file): The editor
opens the file selection window for subprograms. Select the
subprogram and fill out the subprogram dialog. The control
searches for subprograms in the sequence: current project,
standard directory and then machine manufacturer directory.
L call internal... (the subprogram is contained in the main
program): The editor opens the subprogram dialog
Block functions. This menu item contains functions for marking,
copying and deleting sections
Marking On/Off: activates/deactivates the marking mode
during cursor movement
Cancel marking: After calling the menu item, no part of the
program is marked
Cut Ctrl+X: deletes the marked part of the program and
copies it to the clipboard
Copy Ctrl+C: copies the marked part of the program into the
clipboard
Insert Ctrl+V: inserts the contents of the clipboard at the
cursor position. Any parts of the program that are marked are
replaced by the contents of the clipboard
54
at the cursor position
CONST is not
DIN PLUS word
HEIDENHAIN | User's Manual smart.Turn and DIN Programming | 12/2017
NC programming | Fundamentals: smart.Turn editor
DIN