Linear Slot Pattern, Lateral Surface Unit - HEIDENHAIN CNC PILOT 640 User Manual

2

Linear slot pattern, lateral surface unit

The unit machines a linear slot pattern in which the individual
features are arranged at a regular spacing on the lateral surface.
The Start point of the slots correspond to the pattern positions.
You define the Slot length and the
unit. The slot width equals the diameter of the milling cutter.
Unit name: G792_Lin_Mant_C / cycle: G792
Further information:
Pattern form:
Q: Number of slots
Z1: Start point pattern – position of first slot
C1: Start. angle
Wi: End angle – Angle increment
W: Final angle
Z2: End point pattern
Cycle form:
X1: Upper edge of milling
X2: Milling floor
L: Slot length
A1: Angle to Z axis (default: 0°)
P: Maximum infeed
FZ: Approach feed (default: active feed rate)
Further forms:
Further information:
Access to the technology database:
Machining operation: milling
Affected parameters: F, S, FZ, P
184
position of the slots
"Linear slot, lat. surface G792", Page 407
"smart.Turn unit", Page 78
smart.Turn units | Units – milling, lateral surface (C axis)
in the
HEIDENHAIN | User's Manual smart.Turn and DIN Programming | 12/2017